Skip to main content
close
close
close
close
close
close
close
Change Location
Navigation

Fume Chamber

Fume Extractor and Chamber for Latent Fingerprint Development
The Air Science Laboratory Fuming Chamber uses cyanoacrylate fuming for latent print development on various surfaces. The Fuming Chamber incorporates the Air Science Fume Extraction unit to safely purge the cyanoacrylate when the printing cycle is complete.
 
The fuming chamber and fume extractor combination provides a safe, efficient method of cyanoacrylate fuming with a self-contained filtration system to remove the noxious odors and fumes inside the chamber. Fumes are drawn through a >99% efficient filtering system comprised of a HEPA filter and an activated carbon filter.
 
The heater elements provide precise surface temperatures and the clear front door panel allows for close monitoring of development process. Fuming time and chamber fume evacuation can be user-set to comply with internal department criteria, lab safety protocols or best practices in evidence management.

 

 
 
Get a Quote    Featured Products
 

 

Fume Chamber Basic Features & Benefits

Fume Chamber
In the basic fuming chamber, vapors of cyanoacrylate combine with fingerprint residues and polymerize to form a hard, whitish deposit. Once developed, such prints may either be photographed without further treatment, may be enhanced by dusting with powders for subsequent lifting by tape or stained with dyes.
 
The fume extractor is a self-contained cyanoacrylate filtration system that connects directly to the Laboratory Fuming Chambers via the inlet port. The noxious odors and fumes inside the chamber are drawn through a >99% efficient filtering system comprised of a HEPA Filter and an activated Filter.
 

 

Product Features:

 
A. Heating Elements: Multiple heating elements, operating independently or simultaneously, allow for safe accelerated cyanoacrylate development of latent prints.
Purair Basic lab fume hood features
BLC - 6.5 and BLC - EX
 
B. Door: The heater elements are self-limited for precise surface temperatures and a large clear front door panel allows for close monitoring of latent print development.
 
C. Inlet Ports: Two inlet ports will accommodate accessories such as the optional Fume Extractor, portable humidifier, and standard fuming wands.
 
D. Blower: The unit is equipped with a low noise blower and built-in timer adjustable for up to 30 minute cycles, as well as a continuous running position.
 
E. Timer: Select the extraction time needed and handle other tasks while the fume extraction unit purges harmful vapors from the chambers.
 

 

 

 

Featured Fume Chamber Models

View all Fume Chamber Models

 
 
Learn more about the Fume Chamber line by downloading the brochure or by visiting our Specifications tab that includes information for each model.
 
 



Products

Contact Sales Service Replacement Filters Library Terms & Conditions Site Map
Air Science® • 120 6th Street • Fort Myers, FL 33907
T/239.489.0024 • Toll Free/800.306.0656 • F/800.306.0677
info@airscience.com
LinkedIn Google Plus Twitter Facebook YouTube Instagram

Made in USA
Air Science LLC Affiliations and Certifications
©2017 Air Science® USA LLC. All Rights Reserved. Website designed and built by OffWhite.